Top 5 Best Pond Heaters & De-Icers


If you’re a fish pond owner preparing for the winter season after that you’ll more likely than not need a de-icer, specifically if you have fish
When it concerns fish pond heaters as well as picking the right home heating tools for a pond, often individuals can get puzzled about what is really necessary for their certain fish and fish pond. Do fish require a particular temperature of water to live? Do koi as well as fish have various needs? What is the distinction between a heater and also a deicer?

Types of fish pond heating systems

There are 3 major types of fish pond heating systems that have actually come to be popular: Gas-fired central heating boilers, inline electric hot water heater as well as deicers. As a koi fish pond heater, all work well at their desired function.

Gas-Fired Boiler with Heat Exchanger

With a gas-fired central heating boiler, water within the heater (not the fish pond water) is heated in a gas central heating boiler and after that distributed right into a heat exchanger. At the very same time, pond water is pumped into a separate chamber in the heat exchanger, which takes in warm from the warm water in the neighboring chamber prior to being gone back to the fish pond. A gas-fired boiler system works exceptionally well as a koi pond heating system.

Inline Electric Water Heater

With an inline electric water heater, water is pumped into the home heating chamber where it experiences an electrical heating element. As the water passes through the heating system before being returned to the pond, the component warms the water a little, properly attaining a preferred temperature with time.


Pond heaters/de-icers are simply tools that are positioned into your yard fish pond to aid avoid the build-up of ice as well as gas within the fish pond itself. There are 2 types of pond de-icer:

  • floating pond heater/de-icer – In order for your fish to remain healthy and balanced all year round, it’s crucial that oxygen has the ability to enter the fish pond and poisonous gases be able to leave. Neither of these procedures is possible whenever the surface of the pond is iced up over with a layer of ice. A drifting fish pond heating system hinges on the surface of the water and also switches on whenever the air temperature level dips to a particular level. While some of the fish pond may ice up, the drifting heating system makes certain that a portion of it doesn’t so the fish get the oxygen they require.
  • submersible pond heater/de-icer – Submersible heating systems rest on all-time low of the fish pond and also warmth a basic area, permitting the fish to swim easily in warmer waters. In most cases, the heating system is regulated by a thermostat controller that obtains plugged into a neighboring GFCI-protected electrical outlet. The controller has a temperature probe that signals when it’s time to turn the heating system on and off. Advanced designs have floats that keep tabs on exactly how high or low the water degree is obtaining, which can straight affect the need for boosted or reduced warm.

it’s essential to note that there are a couple of uncertainties when individuals search as well as describe a pond heating system. And we understand that most people actually want a pond de-icer, as opposed to a tool which warms the water to tropical temperature levels, commonly utilized when maintaining exotic fish. these ‘inline fish pond heating units’ are really pricey to run, and therefore we’re not discussing these.
Therefore in this write-up, we’ll be talking about pond de-icers (to aid stop the full build-up of ice on the fish pond surface area), and we’ll merely refer to this as either a de-icer or fish pond heating unit.

Why are fish pond de-icers/heaters important?

As the season’s adjustment, especially from summertime, autumn and also ultimately to the winter season, debris from nearby trees, leaves, plants and also fish waste can collect in the pond as well as at some point sink to the bottom. As these materials go stale within the water, they begin to degeneration, releasing gasses into the water which float up to the surface and also escape into the air.
Nevertheless, as winter season sets in and ice begins to form over the pond’s surface, it blocks these gasses from leaving, as well as they build up to hazardous degrees, which are specifically poisonous to fish.
As a result, a pond heating system plays a vital function in aiding prevent the development of freeze the fish pond surface, so that these gases can be launched into the ambiance, as well as your pond fish can survive with the wintertime duration.
You might be believing, what regarding if I manually interfere with the buildup of ice externally of the pond by using brute force, making use of a hammer let’s claim … And if you weren’t thinking of that, after that, believe me, some individuals have tried this! We do not advise utilizing any kind of physical get in touch with to avoid ice developing, as the shock from hitting the ice can terrify and also even physically damage the fish themselves.

Exactly how do fish pond heating systems work?

Fish pond de-icers typically include a heating element that is affixed to some kind of floating tool. The element prolongs right into the fish pond as well as heats the water around it, which rises to the surface area. This sort of model commonly has an opening at the top. By doing this, in really severe cold weather, an opening straight above the burner can still be kept (see the image).
Alternatively, the heating element can be connected directly to the floating gadget. In this case, water is heated around the circumference of the de-icer.

And so, consider the best pond heaters & De-Icers 2019

1.K&H Thermo-Pond 3.0 Pond De-Icer


  • Dimensions 12.5″ Dia x 4.5″ H
  • Recommended pond size Up to 300 Gallons
  • Recommended pond depth Min. 18″ Deep
  • Wattage 100
  • Power cord length 12′
  • Ventilation hole 3″
  • Warranty 1 Year
  • Maintains Open Hole In Ice For Ventilation
  • Safe To Use In Ponds With Fish
  • Thermostatically Controlled

The K&H ™ Thermo-Pond 3.0 De-icer normally allows the fish pond to freeze over while keeping a 3″ airflow opening to permit appropriate gas exchange to assist fish make it through the winter. The patented innovation includes a totally enclosed heating element that avoids damages to fish as well as rubber EPDM pond linings. Making use of just 100 watts as well as the internal thermostatic control, this de-icer will just run as frequently as needed to keep a 12″ hole in the ice around the unit to save on energy expenses, even in ice-cold climate. Suitable for fish ponds as much as 300 gallons, the Thermo-Pond 3.0 De-icer has a 12′ power cord as well as is backed by a 1-year warranty.

2.Laguna PowerHeat Heated De-Icer for Ponds – 15 Watts


  • 15 Wattage
  • 7 meter (22-feet) electrical cord size with grounded plug
  • High visibility LED pilot light when engaged
  • Interior thermostat to immediately close down if getting too hot
  • Appropriate to deal with temperature levels to -20 degrees Fahrenheit
  • Appropriate for both liners and also preformed fish ponds
  • Fish & Plant Safe
  • Dimensions: 7.5 ″ x 7.5 ″ x 5.2 ″.
  • Weight: 3.93 lbs.
  • Suppliers guarantee.

The Laguna Power Heat de-icer & floating fish pond heating unit helps stop topping over near the aspect and also consequently allows harmful gases to be launched from the natural fish pond

he heating unit de-icer is suitable for both plastic and also lining ponds and also is risk-free to utilize in ponds that have fish and also plants in

The unit’s 15-watt heating element is designed to meet any kind of snow upon immediate call, which implies that you don’t need to worry about it not functioning

One more nice function of this system is there are interior safety and security attributes to prevent burn-out or electrical issues, implying that the gadget will certainly switch off to avoid any breakdown.

3.Allied API 8PB Precision Pond De-Icer & Breather – 40 Watts


  • 40 Wattage
  • 4.5 meter (15-feet) electrical cable
  • Size with based plug
  • Sturdy plastic construction
  • Appropriate to cope with
  • Temperatures down to -22 levels
  • Fahrenheit
  • Ideal for both linings and also
  • preformed fish ponds
  • Fish & Plant Safe
  • Measurements: 15.5 ″ x 9 ″ x 6 ″.
  • Weight: 4 lbs.

This unit functions flawlessly and also would be excellent for a small/mid-sized pond, unless you’re thinking about obtaining multiple devices and afterward you could just as use it them for much larger-sized fish ponds.

The unit itself operates 120 volts, at an extremely efficient 40 watts. As a result, the business case that it uses “31 times much less power than 1250 watt pond de-icers”. As well as every 24-hours, the system exposes 4,000 to 10,000 times much more surface of water than standard heating units or de-icers.

Likewise, to the previous unit, it functions by relocating water over the ice as well as therefore getting rid of poisonous gasses from the fish pond during winter months.
However, one facet that we would have liked this unit to have is an interior thermostat as well as in-built security preventative measures to turn off the device in a situation of a circuit breakdown or various other issues.

4.Danner Eugene Pond P 02175 Heater & De-Icer – 120 Watts


  • 120 Wattage
  • 5.5 meter (18-feet) electric cord length with based plug
  • Developed for lasting, harsh cool conditions
  • Energy reliable with thermostatic control
  • Appropriate for both liners as well as preformed fish ponds
  • Dimensions: 12 ″ x 5 ″ x 12 ″.
  • Weight: 4 lbs.

The Danner Eugene PondMaster De-icer as well as heating system appropriates for long-term positioning in ice/snow conditions. The unique doughnut-shaped layout implies that it can prevent ice from collecting in its central location, which enables harmful gasses from the pond water to run away.

Because this device is 120 watts, it will undoubtedly take more power than the reduced electrical power models, and therefore if you have a bigger fish pond, as well as a larger hole that you want to create, this system may be more suitable. Not only this, but the pond heating system itself is energy-efficient and also won’t damage your fish pond, plants or fish.

In addition, this unit has a large 18 feet wire size, so for those who do not have a close-by plug socket, this extra cable length might be useful.

5. API Floating De-Icer / Heater – 1500 Watts


  • 1500 Wattage
  • Cable departures from the top for added security
  • Internal thermostat to instantly close down if getting too hot
  • Guards to protect the warmed filament
  • Ideal for both liners as well as preformed fish ponds
  • Fish & Plant Safe
  • Measurements: 14.6 ″ x 5.4 ″ x 15 ″.
  • Weight: 3.1 lbs.

The API 1500 Watt floating De-Icer is a very minimalistic-looking pond heater. It features a guard which will certainly need to be set up (refer to Youtube for a presentation on exactly how to do this upon arrival, although directions are provided).

The unit has an inner thermostat and also, therefore, it will only activate as soon as the water gets to listed below a particular temperature level.

When it comes to the size fish pond that this system is suitable for, with being a 1500 watt system, we ‘d be extra likely to utilize it in bigger ponds, holding 500+ gallons of water, with some reviewer’s stating that it’s excellent on their 1200-1500 gallon pond.

There should be a metal cage consisted of with the heating unit itself, to avoid any damages to the pond liner/plastic.

Related Post

Leave a Reply

Your email address will not be published.